The Katool H115Z is an 11,000-lb two-post lift built around a dual hydraulic chain-drive cylinder system — the same setup found in professional shop equipment that typically costs significantly more. One cylinder runs inside each column, so both arms rise in sync rather than one lagging behind. The base plate design eliminates the overhead beam, which means faster installation and a much easier unload from the delivery truck. Note: requires a minimum 11 ft ceiling (110.9" overall height), 12 ft of floor width, and 5.9" concrete rated at 3,000 PSI.
Most two-post lifts at this price point use a single-cylinder design that puts uneven wear on the hydraulic system over time. With the H115Z, synchronized dual cylinders keep the lift balanced at every stage — reducing frame stress and extending the life of the hydraulic components. The dual-side manual safety lock release lets you set the arms at multiple heights with confidence, while the automatic safety limit switch and heavy-gauge steel columns back that up with a setup that's CE certified, tested to 115% dynamic load and 150% static load. This isn't a checkbox certification — it reflects a lift built with real tolerances.
The H115Z is a natural fit for independent auto repair shops that run trucks and SUVs through regularly, home garage builders who want a professional two-post setup without a complicated install, and dealerships or body shops where smooth, fast cycle times matter across a full day of work. The 11,000-lb rating also makes it a practical choice for fleet maintenance facilities that can't afford to size down on capacity.
Specifications
| Lifting Capacity |
11,000 lbs (5,000 kg) |
| Max Lifting Height |
70.8" (1,800mm) |
| Minimum Height |
3.9" (100mm) |
| Overall Height |
110.9" (2,818mm) |
| Overall Width |
140.4" (3,565mm) |
| Outside Column Width |
124.8" (3,170mm) |
| Inside Column Width |
110.2" (2,800mm) |
| Drive-Through Clearance |
98.4" (2,500mm) |
| Front Arm Reach |
29.5" – 46" (2-stage adjustable) |
| Rear Arm Reach |
35.4" – 58.2" (2-stage adjustable) |
| Motor |
220VAC / 60Hz / 1-Phase / 2.2KW |
| Net Weight |
1,256 lbs (570 kg) |
| Design |
Base Plate (no overhead beam) |
| Safety Lock Release |
Manual (dual-side) |
| Hydraulic System |
Dual chain-drive cylinders |
| Extension Adaptors |
Screw-on pads with +100mm adaptors (included) |
| Rubber Door Guards |
Included |
| Certification |
CE Approved (115% dynamic / 150% static tested) |
Warranty
Katool backs the H115Z with coverage that exceeds industry standards:
-
1-Year Full Parts Warranty — Includes cylinders, power unit, motor, and all electronics, with free replacement parts and shipping.
-
3-Year Structural Warranty — Protects columns, arms, and base plates against structural defects.
-
Optional 2-Year Extended Warranty — Available for purchase for added long-term protection.
Resources
For more detailed information and guidance, you can download the following:
