The QRS10HP-125 is a 10 HP rotary screw compressor built for 100% continuous-duty operation, delivering 40 CFM at 125 PSI on a 132-gallon horizontal receiver. This is the 125 PSI version of the QRS airend, making it a practical choice when your shop's equipment does not require higher pressure but still demands substantial airflow. The compressor runs on 208-230/460V 3-phase power through a TEFC motor. Note: 125 PSI should be matched to your equipment requirements, especially where long piping runs, regulators, couplers, or other components can reduce pressure before air reaches the tool.
Choosing the 125 PSI configuration can also improve efficiency when higher pressure is unnecessary. A screw compressor uses less energy per cubic foot when it is not working against pressure the application does not need, while lower system pressure can also reduce compressed-air leakage. The load/no-load control with timed shutdown unloads the machine when demand stops and shuts it down after an idle period, avoiding the rapid cycling that can be hard on reciprocating compressors. The UL, cUL, and CSA-approved control panel uses a NEMA 1 enclosure, while vibration-isolated mounting helps limit vibration transfer. Spin-on oil and air/oil separator filters also make routine servicing straightforward.
This compressor fits general automotive repair shops, tire operations, fleet service facilities, and businesses replacing an overworked piston compressor with equipment sized around actual air demand. The 132-gallon receiver helps buffer periods of simultaneous demand and provides a place for moisture to collect before air moves downstream. Since this package does not include a dryer, applications involving paint, instrumentation, or other moisture-sensitive equipment should include appropriate air drying and filtration after the receiver. For shops whose tools are comfortable at 125 PSI, this configuration prioritizes airflow and continuou
Specifications
| Model |
QRS10HP-125 |
| Motor |
10 HP TEFC, 208-230/460V, 3-phase |
| Delivery |
40 CFM at 125 psi |
| Unload pressure |
125 psi |
| Duty cycle |
100% |
| Sound level |
66 dBA |
| Receiver |
132 gallon horizontal tank |
| Tank outlet |
1/2 inch |
| Overall length |
76.2 inches |
| Weight |
589 lbs |
| Electrical protection |
NEMA 1 |
Approvals, Stated Plainly
The listed approval is limited to the electrical panel: UL, cUL and CSA approved, with a NEMA 1 enclosure. This covers the panel only.
The data does not state whether the pressure vessel is registered or certified. If your insurer, jurisdiction or plant safety program requires vessel documentation, confirm it with us before ordering so we can obtain the manufacturer’s paperwork.
Shipping & Delivery
Palletized freight to the lower 48, with shipping quoted live at checkout. At roughly 589 lbs, you’ll need a forklift, loading dock or carrier-terminal pickup. Residential delivery carries an additional fee.
Inspect the shipment before signing. Check the tank shell for impact marks, the shroud for crushing and the pallet for signs of a drop. Photograph any damage and record it on the bill of lading while the driver is present.
Warranty
1-year standard warranty, with a 5-year term available when the machine is commissioned by a factory-authorized startup, typically at a $350 charge. Schedule commissioning with the installation rather than treating it as an optional afterthought.
If a warranty issue occurs, do not disassemble the airend, separator housing or control panel before opening the claim. Keep the machine assembled so the manufacturer can properly assess the failure.
