The Triumph NT-11 is an 11,000 lbs capacity asymmetric two-post floor-plate lift designed for professional repair shops and serious home garages that need reliable service access for cars, trucks, vans, and SUVs. Its floor-plate design connects the columns at ground level instead of using an overhead crossbar, keeping the upper workspace open and making it a practical choice for garages where ceiling height is limited. Note: installation requires a level concrete floor rated at 4" minimum thickness and 3,000 PSI, plus a dedicated 220V single-phase, 30-amp circuit.
The lift uses dual hydraulic cylinders with dual equalizer cables to keep both columns synchronized during operation. Its asymmetric arm configuration positions the vehicle farther back in the bay, improving door clearance when loading and unloading. The front arms feature three-piece double telescoping sections, while the rear arms use two-piece telescoping sections to reach a wide range of factory lifting points. Each arm includes rubber lift pads and accepts stackable steel truck adapters with up to 9" of pad height, making it easier to service higher-clearance vehicles. Automatic arm restraints and multi-position mechanical safety latches help keep the lift secure during use.
With a 72" maximum lifting height, 4.5" lowered height, and 56-second lifting cycle, the NT-11 provides comfortable underbody access while remaining suitable for lower-profile vehicles. The column-mounted electric-hydraulic power unit can be installed on either column and operates on standard 220V single-phase power. Triumph also states the lift is manufactured under ISO 9001 standards and meets CE conformity requirements.
This lift is ideal for automotive repair shops, dealerships, fleet maintenance facilities, and advanced home garages that need a versatile two-post solution for mixed vehicle service. With its 11,000-lb capacity, open upper workspace, asymmetric loading design, and included truck adapters, the Triumph NT-11 delivers the flexibility needed for everyday maintenance and heavier vehicle applications.
Features
- 11,000 lb lifting capacity, rated at 2,750 lb per arm pad
- Asymmetric arm design featuring three-piece double-telescoping front arms and two-piece single-telescoping rear arms for greater vehicle compatibility
- Floor-plate (drive-over base plate) design connects columns at the floor, eliminating overhead obstructions
- Dual hydraulic cylinders, one per column, synchronized by dual equalizer cables for balanced lifting
- Multi-position mechanical safety latches with automatic engagement and dual manual release for enhanced operator safety
- Rack-and-gear automatic arm restraints securely hold arms in position during operation
- Rubber lift pads with stackable steel truck adapters included, providing up to 9" maximum pad height
- Column-mounted electric-hydraulic power unit can be installed on either side for flexible setup
- 220V single-phase power unit, 60 Hz operation, requiring a 30-amp circuit
- 72" maximum lifting height, 4.5" lowered height, and 56-second lifting time
- ISO 9001 manufacturing and CE conformity stated by Triumph
- Includes truck adapters, floor anchors, and mounting hardware
What's Included
- Two columns (power-side and off-side) with carriages
- Drive-over base plate (floor plate)
- Two hydraulic cylinders (one per column)
- Electric-hydraulic motor power unit
- Four asymmetric swing arms with rubber lift pads and pad holders
- 1-1/2" arm mounting pins
- Rack-and-gear arm restraints
- Equalizer cables and chains
- Hydraulic hoses
- Set of stackable steel truck adapters
- Floor anchors (3/4" × 5-1/2") and mounting hardware
- Installation and operation manual
Specifications
| Triumph NT-11 Specifications |
| Lifting capacity |
11,000 lbs |
| Capacity per arm pad |
2,750 lbs |
| Arm configuration |
Asymmetric |
| Lifting height (max) |
72" |
| Lowered height |
4.5" |
| Lift time |
56 seconds |
| Overall height |
116" |
| Overall width |
138" |
| Distance between posts |
112" |
| Drive-through width |
102" |
| Front arm reach |
29.50" – 49.25" |
| Rear arm reach |
34.25" – 49.25" |
| Maximum pad height |
9" |
| Power supply |
220V single-phase, 60 Hz |
| Hydraulic fluid |
AW32, about 3 gallons |
| Hydraulic cylinders |
Dual (one per column) |
| Certifications |
ISO 9001, CE |
| Concrete requirement |
4" minimum thickness, 3,000 PSI minimum |
| Shipping weight |
1,550 lbs |
| Installs on a level, cured concrete floor meeting the spec above. Confirm a dedicated 220V single-phase circuit (30-amp) is available before purchase. |
Warranty
The Triumph NT-11 includes a 1-year parts warranty (labor not included). During the warranty period, Triumph provides phone-based troubleshooting and will ship necessary replacement parts at no cost with free ground shipping.
Rubber lifting pads are excluded from warranty coverage. Hydraulic cylinders include a 30-day full warranty; after this period, a seal kit will be provided if needed. Labor costs and freight charges outside the included coverage are the responsibility of the owner.
To initiate a warranty claim, contact support@carliftsupply.com or call 877-600-5227.
Documents
Triumph NT-11 Installation & Operation Manual (PDF)
Authorized Dealer - Full Warranty Included
