The Katool KT-X95 is a full-rise flush-mount scissor lift rated at 8,000 lbs (3,500 kg), designed for permanent in-floor installation in professional shop bays. Unlike the portable and fixed-surface scissor lifts in the Katool lineup, the X95 mounts flush with the shop floor ā the platform sits at drive-on level when lowered, keeping the bay clear and the workflow uninterrupted between vehicles. It carries CE certification tested at 115% dynamic and 150% static load capacity and runs on a pneumatic safety release, which requires a compressed air source for operation. Note: the X95 must be anchored to concrete at least 5.9" (150 mm) thick with a minimum 3,000 PSI rating before use ā verify concrete thickness and strength before purchase and installation.
Control runs through a 24V low-voltage system with a height limit switch that stops the lift before it can overtravel. The top-level hydraulic system paired with an aluminum motor and integrated cooling fan maintains consistent performance through extended use without heat-related pressure drop. Composite rubber lifting blocks protect pinch welds and rocker panels on contact, self-lubricated bushings and bearings reduce maintenance intervals, and the drive-up ramp lock design extends the platform for longer wheelbase vehicles.
The KT-X95 is built for professional shops and dealership service bays doing a permanent installation where floor-level presentation and unobstructed bay access between lifts matter. It's the right choice for high-volume service operations that want the lifting capacity and CE safety certification of a full scissor lift in a format that disappears into the floor when it's not in use.
Features
- 8,000 lb (3,500 kg) lifting capacity
- CE approved and certified, tested to 115% dynamic and 150% static load capacity
- Flush-mount design for a clean, integrated installation
- Pneumatic safety release for smooth, controlled lowering
- 24V safe control system with height limit switch for reliable operation
- Reliable start-up system design for consistent performance
- Composite rubber lifting blocks included
- Self-lubricated bushings and bearings for smooth, low-maintenance operation
- Drive-up ramp lock design extends platform length to accommodate longer vehicles
- Top-grade hydraulic system with aluminum motor and cooling fan to prevent overheating during extended use
Specifications
|
Max.lifting capacity
|
8000 lbs |
| Lifting height |
72.3 inch |
| Lifting time |
?50S |
| Platform length |
58.9 inch |
| Platform width |
24.4 inch |
| Motor power |
2.2kw |
| Rated oil pressure |
20MPa |
| Air pressure |
6-8kgf/c ?
|
Ā
Warranty
Katool offers a limited one-year (12-month) warranty on all parts and product defects at no charge. An extended 2-year warranty plan is also available for any Katool or M&E automotive equipment.
What's Covered
Cylinders, power units, motors, displays, electronics, and related components. Vehicle lifts receive an additional three-year (36-month) warranty covering structural components.
Warranty Conditions
- Claims must be submitted within the active warranty period
- Warranty is non-transferable and requires the original order number and proof of purchase from Katool or an authorized vendor
- Approved replacement parts are provided at no cost, with free shipping included
Resources
For more detailed information and guidance, you can download the following:
