The Atlas Air Force AF8P is a 5 HP, two-stage commercial air compressor with an 80-gallon vertical steel tank made in the USA. Its two-cylinder pump runs at 1,750 RPM and delivers 20 CFM at 145 PSI and 19 CFM at 175 PSI, providing the output needed for multiple pneumatic tools in a busy shop. The unit operates on 220V single-phase power with a 30-amp breaker and #10 wire. Its 80-gallon vertical design also helps conserve floor space compared with a horizontal tank.

The AF8P adds Atlas's factory-installed Plus Package, combining an air-cooled aftercooler, automatic low-oil monitor, and automatic tank drain. The aftercooler lowers compressed-air temperature before it reaches the tank, helping condense moisture before it travels downstream. The low-oil monitor shuts the compressor down when oil levels become unsafe, while the automatic drain removes tank condensate without requiring manual valve operation. An EATON magnetic starter manages motor startup, paired with a Hubbell industrial pressure switch for compressor cycling. A finned tank-inlet tube, heavy-duty metal belt guard, vibro-isolation pads, and drain extension tubes round out the setup for daily shop use.

With its 80-gallon reserve and two-stage 175 PSI capability, the AF8P is suited to 3- to 4-person automotive shops, professional garages, and smaller operations planning for increased air demand. The 3/4" NPT outlet provides a connection point for shop air lines, while the vertical tank keeps the compressor's footprint concentrated in a relatively compact area. The Plus Package also makes this version a fit for shops that want automatic moisture management and low-oil protection built into the compressor rather than added later.

Features

• 2-cylinder, 2-stage pump — Designed for commercial-duty operation
• 5 HP, 1,750 RPM heavy-duty motor — Runs on 220V single-phase power
• 80-gallon vertical steel tank, made in the USA
• 20 CFM at 145 PSI / 19 CFM at 175 PSI with a 145–175 PSI operating range
• 3/4" NPT air outlet for shop air connections
• Plus Package — Automatic low-oil monitor, automatic tank drain and air-cooled aftercooler
• Eaton magnetic starter — Provides controlled motor starting and protection
• Hubbell industrial-grade pressure switch
• Compressor-oil drain extension tube — Simplifies routine servicing
• Hands-free tank drain extension — Makes condensate draining easier
• Finned tank-inlet tube — Helps reduce moisture accumulation inside the tank
• Heavy-duty metal belt guard — Protects the belt-drive components
• Vibration-isolation pads included
• Commercial shop configuration — Suitable for daily use in small multi-technician shops and growing operations

Specifications

Warranty

The AF8P includes a 1-year parts-only warranty from Atlas Automotive Equipment. Atlas covers eligible replacement parts during the warranty period; labor and freight are the owner’s responsibility.

FAQ

Is 20 CFM at 145 PSI enough for multiple shop tools?

The AF8P delivers 20 CFM at 145 PSI and 19 CFM at 175 PSI, with an 80-gallon receiver for stored air. This provides airflow for many common shop tools, while high-CFM equipment such as media blasters and large sanders may require a larger compressor. Check each tool’s CFM requirement for your application.

Is the AF8P single-phase or three-phase?

The AF8P runs on 220V single-phase power with a 30A breaker and #10 wire. No three-phase service is required. The factory-installed Eaton magnetic starter provides motor starting and protection.

What does the Plus Package include?

The Plus Package includes three factory-installed features:

• Automatic low-oil monitor — Shuts down the compressor if oil levels become too low.
• Automatic tank drain — Automatically removes condensate from the tank.
• Air-cooled aftercooler — Cools compressed air before it enters the tank and air system.

How loud is the AF8P?

Atlas describes the AF8P as offering “extremely quiet operation.” The compressor uses a 1,750 RPM motor, vibration-isolation pads and a heavy-duty belt guard. Atlas does not publish a decibel rating for this model.

Does the AF8P require a special concrete pad?

No special pad is specified. Install the AF8P on a level shop floor with the included vibration-isolation pads. Follow local code requirements for anchoring.

Will the AF8P fit through a standard shop door?

The AF8P measures 40" L × 24" W × 71" H and has a listed shipping weight of approximately 605 lbs. Measure your doorway and delivery path before ordering.

What is the warranty?

The AF8P has a 1-year parts-only warranty. Replacement parts are covered during the warranty period; labor and freight are the owner’s responsibility.

Documents

The AF8P owner’s manual and technical documents are available on request — contact support@carliftsupply.com or call 877-600-5227.