Description

This screw pad works with all KATOOL's two post lifts.

The Katool KT-MP4 is a set of four 6-inch steel height-extension adapters that add 6 inches of vertical clearance to every arm on a Katool two-post lift. Each adapter is a single-piece steel column — the top cup slips over the existing pad's 1.57"-diameter peg and the bottom peg seats into the arm receptacle. No tools, no removal of the factory pads, and installation takes seconds per arm.

Built for shops that regularly work on lifted trucks, raised SUVs, and 4×4s with oversized off-road tires — vehicles whose frame rails sit higher than the factory pad height can reach without stacking adapters. The KT-MP4 closes that gap cleanly without improvising with mismatched hardware.

Compatibility: Dimensioned for Katool two-post lift arms — 1.57" top inner diameter, 0.59" bottom peg. Confirm your existing pad geometry before ordering if you're unsure of fit.

Specifications

Documents

Manual and technical documents available on request — contact support@carliftsupply.com or call 877-600-5227.

The Katool KT-MP5 is a set of four frame cradle adapters for two-post lifts, built for trucks, SUVs, and body-on-frame vehicles where a flat rubber lift pad doesn't make secure contact with the vehicle's frame rail. Each cradle stacks directly onto the existing lift arm pad, adding 2 inches (50mm) of contact height and a rubber contact surface inside a steel cup — the surrounding steel walls keep the frame rail seated inside the cradle throughout the lift, and four grip holes in the rubber reduce slippage during the raise and at working height.

Where standard lift pads work well on unibody vehicles with defined pinch welds, body-on-frame trucks and SUVs often present exposed frame rails that a flat pad can't hold reliably. The KT-MP5 addresses that directly with a cradle geometry designed for that contact point. Shops that move frequently between unibody passenger cars and frame-contact trucks can keep a set on hand and swap them onto the arms as needed — stack on, lift, remove.

Sold as a set of four, one per arm. Always verify cradle clearance against underbody components on the specific vehicle before raising the lift.

Features

• Compact and lightweight design makes it easy to transport and reposition wherever it's needed.
• Impressive 7,716 lb (3,500 kg) lifting capacity handles a wide range of vehicles with ease.
• Durable steel construction ensures long-lasting performance and reliability under regular use.
• User-friendly mechanism allows for quick, straightforward tire changes with minimal effort.
• Stable, secure platform provides a safe and reliable base during lifting operations.
  

Specifications

Documents

Manual and technical documents available on request — contact support@carliftsupply.com or call 877-600-5227.